TP316Ti

Material

  • ◎ TP316Ti, UNS S31635, 1.4571, X6CrNiMoTi17-12-2, 06Cr17Ni12Mo2Ti

Overview

TP316Ti is a high performance austenitic stainless steel pipe that incorporates titanium elements. It possesses properties such as resistance to inter-granular corrosion, high temperature resistance, and high strength, and widely used in extreme working conditions in fields like chemical engineering, petroleum, and food processing.

Characteristics

    • TP316Ti is a material that adds titanium (Ti) element to 316L, significantly enhancing its resistance to inter-granular corrosion, and maintaining stable performance even after welding.

      Its key characteristics include:

    • ◎ High-temperature resistant: Can work for a long time in high-temperature steam and hot oil media
    • ◎ Strong corrosion resistance: Resists acid, alkali, salt and seawater erosion
    • ◎ Excellent mechanical properties: Tensile strength ≥ 530 MPa, elongation ≥ 40%
    • ◎ Non-toxic and environmentally friendly: Complies with hygiene requirements in the food and medical fields

Typical Application

Chemical/Pharmaceutical: Suitable for transporting strong acids and organic solvents, in compliance with GMP standards.
Petroleum and natural gas: Oil well casings, refining equipment, resistant to high pressure and corrosion.
Food processing: Milk products, beverage conveying pipelines, non-toxic and easy to clean.
Marine engineering: Offshore platforms, submarine pipelines, resistant to seawater corrosion

Chemical composition

TP316Ti as per ASTM A213

wt% C Si Mn P S Cr Ni Mo Ti N
≥ 16.00 10.00 2.0 5(C+N)
≤ 0.08 0.75 2.00 0.045 0.030 18.00 14.00 3.00 0.70 0.10

1.4571 as per EN 10216-5

wt% C Si Mn P S Cr Ni Mo Ti N
≥ 16.50 10.50 2.00 5C
≤ 0.08 1.00 2.00 0.045 0.015 18.50 13.50 2.50 0.70

Mechanical property

Temper TP316Ti 1.4571
Tensile Rm 515 Mpa (min) 500-730 Mpa (min)
Rp 0.2% Yield 205 MPa (min) 210 MPa (min)
Elongation (2″ or 4D gl) 35 % (min) 35 % (min)

Heat treatment and hardness

Solution treatment 1040°C (1900°F), water or other rapid cool.

Hardness: max. 192 HBW or 200 HV or 90 HRB

Available Process

  • ◎ Cold worked
  • ◎ Cold worked and bright annealed
  • ◎ Cold worked, annealed and pickled
  • ◎ Cold worked, polished (MP, EP etc.)
  • ◎ Cold worked, bright annealed, polished (MP, EP etc.)

Product forms

Capillary tube

OD 0.08 ~ 6.0 mm
WT 0.015 ~ 1.5 mm

Thin wall & Ultra thin wall seamless tube

OD 6.0 ~ 80.0 mm
WT 0.05 ~ 4.5 mm

Micro ID and heavy wall seamless tube

OD 3.0 ~ 50.0 mm
ID 0.30 ~ 5.0 mm

Precision seamless tube

OD 6.0 ~ 89 mm
WT 0.50 ~ 9.0 mm

Profiled seamless tube

Build to drawing
Build to specification

Precision conic seamless tube

Bigger end: OD3.0 – 28.0mm
Smaller end: OD2.5 – 25.0mm
WT: 0.25 – 1.50mm

HP / UHP BA+ tube

OD 1.0 ~ 76 mm
WT 0.10 ~ 10.0 mm

Bourdon tube

Y40, Y50, Y60, Y70, Y100, Y150

Service

  • ◎ Precision cutting
  • ◎ Tube surface treatment, like ID surface super mirror polishing, best level reach Ra0.0015um
  • ◎ Tube deep processing, like coiling, bending, end forming, body forming, laser processing, various needles processing, built to drawing and sample, etc.